Installation Method Of Metal Carved Board

1. Pretreatment
Before installing the metal carved board, necessary pretreatment is required. First, check whether the wall or ceiling to be installed is flat, dry, and clean, and remove debris, oil stains, etc. on the wall. If there are uneven places on the wall or ceiling, they should be repaired and polished flat with tools such as grinders. Next, the size, height, inclination and other parameters of the wall or ceiling need to be measured to prepare for installation.
2. Measurement and preparation
After the measurement is completed, you can start making wooden keels and installation brackets. According to the measurement results, cut the keel into the corresponding length, position it on the wall, and ensure that the distance between the two wooden keels is uniform. At the same time, it is necessary to cut and install the metal carved board, and place the board on a flat surface for measurement and cutting.
3. Installation
When the keel and board are ready, the metal carved board can be installed. Fix the keel on the wall at a certain distance (generally 60-80 cm, adjusted according to actual conditions), and determine the installation method. Next, place the metal carved board on the wooden keel according to the design plan and fix it with rivets or screws. During the installation process, attention should be paid to controlling the arrangement method to ensure that the spacing between each flower board is uniform and beautiful.
4. Subsequent processing
After the metal carved board is installed, some post-processing work is required. First of all, the installation screws, rivets, etc. should be hidden to ensure the overall beauty. After that, follow-up construction such as painting should be carried out, and the board surface should be cleaned and polished as needed.
It should be noted that special attention should be paid to safety when installing metal carved boards to avoid harming people. Before installation, check whether the tools and materials used meet the requirements. During the specific operation, protective measures should be taken, work clothes and gloves should be worn to ensure the safety of personnel.